• #### frankiezafe 16:33 on 2017-03-26 Permalink | Reply Tags: algorithm ( 13 ), code, math ( 7 ), processing.org ( 4 )

To generate the bocks of building based on the roads structure, the method I’m building is based on a simple idea: when you arrives at a crossroad, you take the first street on the right and you go on like this until you reach a dead-end or your starting point. If you reach your starting point, the succession of roads you took defines a block of building. In theory. This technique has been suggested by Michel Cleempoel, on the way back from school.

After a bit of preparation of the road network (removing orphan roads, having no connection with others, and dead-ends parts of the roads), the real problem arouse: how do you define right in a 3d environment, without an absolute ground reference. Indeed, I can configure the generator to use the Y axis (top axis in ogre3d) in addition to X & Z.

At a crossroad, you may have several possibilities of roads. In the research, these possible roads are reduced to 3d vectors, all starting at world’s origin. The goal is to find the closest vector on the right of the current one, called the main 3d vector in the graphic above..

The right is a complex idea, because it induces an idea of rotation. The closest on the right doesn’t mean the most perpendicular road on the right side. Let say I have 4 roads to choose from. Two going nearly in the opposite direction of the road i’m on, one perpendicular and one going straight on.

If I compute the angles these roads have with the current one, results are:

1. 5°,
2. -5°,
3. 90°,
4. and 170°.

The winner is not the 90°, but the 5° road! If I sort them, the last one must be the -5°, who is the first on the left.

##### 3d plane from a 3d vector

The first thing to do is to define reference plane. To do so, you get the normal vector of the road by doing a cross product with the UP axis (Y axis in this case). The normal gives you a second vector, perpendicular to the road, and therefore defines a plane. Let’s call it VT plane, for Vector-Normal plane. For calculation, we need the vector perpendicular to this plane, rendered by crossing the road and its normal, let’s call it the tangent vector. Until here, it’s basic 3d geometry.

##### projection of 3d vectors on a plane

We can now project all the possible roads on the VT plane. These are the yellow vectors in the graphic. The math are clearly explained tmpearce on stackoverflow. Implemented in processing, it gives:

```      float d = othervector.dot( tangent );
PVector projectedvector = new PVector();
projectedvector.mult( d * -1 );
```

We are nearly done!

##### angle between 3d vectors

The projected vectors will help the angle calculation. Indeed, the current vector and the projected ones being coplanar, they share the same normal. The way to get the angle between 2 coplanar vectors is described by Dr. Martin von Gagern, on stackoverflow, once again. See Plane embedded in 3D paragraph for the code i’ve used.

And… tadaaammmm! The number rendered by the method is the angle i was searching for, displayed in degrees in the graphic above.

• #### frankiezafe 18:12 on 2017-03-24 Permalink | Reply Tags: Contredanse ( 8 ), Danse, presentation ( 6 ), Tuning Scores ( 14 )

Ouverture Studio – atelier Lisa Nelson

Le 24 mars 2017 à 18h30, les portes s’ouvriront sur l’atelier et les jeux, invitant le public à jouer de son attention et imagination.

Plus d’info sur le site de charleroi-danse.

• #### frankiezafe 18:58 on 2017-03-23 Permalink | Reply Tags: algorithm ( 13 ), disrupted cities ( 10 ), generative ( 10 ), gif ( 2 ), Openframeworks ( 9 ), video ( 24 )

Road network generation: the gif gives you an idea of the procedure executed in ~300 milliseconds by the c++.

With a deformation:

## Polymorph Engine is on itch.io

The Polymorph Engine is on itch.io, the go-to community website for sharing, rating and downloading indie games. It sits in the well-named “tools” section where it is already getting some attention.

But we need your help to bring it further. So if you have an itch.io account, be sure to check the Polymorph Engine page, download the install script, give it a 5 stars ratings, or even add it to your favorites.

While you are there, be also sure to check out and follow Frankie and xuv profiles and collections, you might discover some gems.

Let us know about your itch.io profile in the comments. We’ll be sure to check it out.

• #### frankiezafe 21:35 on 2017-03-19 Permalink | Reply Tags: algorithm ( 13 ), configuration, disrupted cities ( 10 ), network ( 4 ), Openframeworks ( 9 )

Different kind of network generated by 3 configurations (images go 2 by 2).

Note: add a variation on the roads length (min, max will be ok).

• #### frankiezafe 20:50 on 2017-03-18 Permalink | Reply Tags: algorithm ( 13 ), disrupted cities ( 10 ), math ( 7 ), Openframeworks ( 9 )

Result of different configuration of network at each pass. In each image, you see the road network alone and the network with the control grid. I’m proud to mention that the generation time on a big network is taking around 500 millis, something easy to hide with a small transition.

Here, there are 3 + an initial road (the thick one). In each pass, the road becomes smaller and thinner.

It’s also possible to generate the same network with depth enabled. It’s becoming very complex to follow visually, but it makes no mistake 🙂

• #### frankiezafe 17:46 on 2017-03-18 Permalink | Reply Tags: dev ( 52 ), generative ( 10 ), math ( 7 ), Openframeworks ( 9 ), random, research ( 10 )

• generation of normal and tangent for each segment (cyan & purple vectors): they can be used easily to generate a new road starting from any point;
• a million better random selection, based on the formula: X1 = a*X0 + b % m;

This random generation merits a bit of attention.

Until now, i was randomly picking a new start point from an existing road to create a new road. The process is consuming, and there is no guarantee to avoid picking several time the same point on the same road.

With the formula above, found in the great numberphile channel (see below), I attribute once and for all a random to each road’s dot. The particularity of this random generation is that it will NEVER repeat two times the same value in one sequence. Once generated, my dots have a number in the range [0,1], with a linear distribution.

For instance, in a line having 10 dots (and therefore 9 segments), each dot will have a random number between 0 and 1. If you order the list of dots by random values, and compare the gap between each sorted values, the average gap will be 0.1!

The way to use this random number is straight forward. If you want to generate a secondary road on 50% of the dot of the first one, you just have to loop over these number and check wherever the random value of the dot is < 0.5. If the distribution was not linear, doing this would not guarantee to create on sub-road every two dots. As it is, you can just specify the percentage, all random calculation has already been done, and in a more controlled way then ofRandomuf() does it.

This formula requires big prime numbers (>10000) to be placed at a and b. Here is the source i used: list of primes.

• #### frankiezafe 00:12 on 2017-03-16 Permalink | Reply Tags: note ( 2 ), research ( 10 ), rigging ( 4 )

too look at closely:

• #### frankiezafe 20:34 on 2017-03-11 Permalink | Reply Tags: algorithm ( 13 ), C++ ( 10 ), dev ( 52 ), disrupted cities ( 10 ), generative ( 10 ), Openframeworks ( 9 )

flat network (no Z)

slight Z curvature

strong Z curvature

strong Z curvature

strong Z curvature

After a bit of struggle with the management of a 3d grid, the advantage is there: it’s now easy to generate a road network in 3D, with automatic connection of the streets while generating them. It’s a simple brute force & unsupervised generation algorithm, but it is memory efficient and error less.

Just to explain a bit the images above: the cubes are the cells of the road grid. Only the required one are created during road generation. There are connected to each other to speed up the proximity tests once a now road segment is added. I’ll measure the generation time soon, but it’s already quite fast regarding to the first test made several days ago in processing.

• #### frankiezafe 17:45 on 2017-03-11 Permalink | Reply Tags: algorithm ( 13 ), C++ ( 10 ), disrupted cities ( 10 ), Python ( 5 )

Generation of a 3d grid of cells, each one of the cells knows who are the surrounding ones. This to speed up searching around the current cell.

To generate a unique id for each one of the surrounding cell, and quickly find the current cell in the surrounding cell, i used a python that generates a list of enum and a map of opposition. Therefore, when I create a new cell in the grid, its very fast to register it into all the existing ones.

c
Compose new post
j
Next post/Next comment
k
Previous post/Previous comment
r
e
Edit
o
t
Go to top
l
h
Show/Hide help
shift + esc
Cancel